Personal Profile

杨柏松，工学博士，硕士生导师。2022年毕业于武汉大学动力与机械学院，材料加工工程专业。主要研究方向为柔性传感器、柔性驱动器、仿生多功能气凝胶、低温3D打印等。主持或参与金华市公益性技术应用研究项目1项、国家自然科学基金项目1项、国家重点研发计划1项。近年来，在Chemical Engineering Journal, Journal of Bionic Engineering, Materials Today, Advanced Science, Small, ACS Applied Materials & Interfaces等期刊发表SCI论文10余篇，申请发明专利5件。

主要项目：

(1) 金华市科技局，公益性技术应用研究项目，填料/模量垂直双梯度介电弹性体微纳构建及发电性能研究，2024.6-2026.5，在研，主持

(2) 浙江省教育厅，一般科研项目，仿生梯度多孔材料的冷冻3D打印及其性能研究，2024.1-2025.12，在研，主持

(3) 国家自然科学基金面上，仿生微纳复合黏附垫的设计构建及其黏附与摩擦性能研究，2020.1-2023.12，结项，参与

(4) 国家重点研发计划，基于增材制造的智能仿生结构设计技术，2018.5-2021.7，结项，参与

代表性论文：

[1] B.S. Yang, et al. Strong and crack-resistant hydrogel derived from pomelo peel for highly sensitive wearable sensors. Chemical Engineering Journal, 2022, 431, 134094. SCI一区

[2] B.S. Yang, et al. Pomelo peel-inspired 3D-printed porous structure for efficient absorption of compressive strain energy. Journal of Bionic Engineering, 2022, 19(2), 448-457. SCI二区

[3] W.H. Chen, X.L. Zhang, X.C. Yang, B.S. Yang, et al. Bioinspired anisotropic PEEK for solvent sensing and programmable actuations.  Chemical Engineering Journal, 2023, 468, 143808. SCI一区

[4] X.H. Zhou, L. Yin, B.S. Yang, et al. Programmable local orientation of micropores by mold-assisted ice templating. Small Methods, 2021, 5, 2000963. SCI一区

[5] X. Wang, B.S. Yang, et al. Bioinspired footed soft robot with unidirectional all-terrain mobility. Materials Today, 2020, 35, 42-49. SCI一区

[6] Q. Liu, D. Tan, F.D. Meng, B.S. Yang, et al. Adhesion enhancement of micropillar array by combining the adhesive design from gecko and tree frog. Small, 2020, 17, 2005493. SCI一区

[7] Q. Li, L.J. Li, K. Shi, B.S. Yang, et al. Reversible structure engineering of bioinspired anisotropic surface for droplet recognition and transportation. Advanced Science, 2020, 7, 2001650. SCI一区

[8] Q. Liu, F.D. Meng, X. Wang, B.S. Yang, et al. Tree frog-inspired micropillar arrays with nanopits on the surface for enhanced adhesion under wet conditions. ACS Applied Materials & Interfaces, 2020, 12, 19116-19122. SCI一区

[9] X. Wang, D. Tan, S.Q. Hu, Q. Li, B.S. Yang, et al. Reversible adhesion via light-regulated conformations of rubber chains. ACS Applied Materials & Interfaces, 2019, 11, 46337-46343. SCI一区

[10] D. Tan, X. Wang, K. Shi, B.S. Yang, et al. Switchable adhesion of micropillar adhesive on rough surfaces. Small, 2019, 15, e1904248. SCI一区

[11] J.X. Xue, B.S. Yang, Z.Y. Li. Contact Characteristics Analysis of Taper Rollers and Oilstones in Through-feed Superfinishing. 6th International Conference on Mechatronics, Materials, Biotechnology and Environment, 2017, 83, 339-343. 国际会议

[12] 薛进学,杨柏松,等.圆锥滚子贯穿式超精研加工特性分析.轴承,2017,(6):6. 中文核心

[13] 薛进学,杨柏松,等.圆锥滚子定姿态贯穿式超精研油石磨刃分析.机械科学与技术,2017,36(8):6. 中文核心

主要发明专利：

(1) 桂成群, 赵强, 杨柏松, 薛龙建, 陶国裔, 鲁才. 一种飞秒、纳秒激光制备图案化柔性传感器及其制备方法. ZL202210399721.9

(2) 桂成群, 赵强, 周圣军, 薛龙建, 杨柏松. 一种飞秒激光制备适用于检测人体运动的柔性传感器及其制备方法. ZL202210073665.X

(3) 薛龙建, 陈雯慧, 杨柏松, 谢宇杨, 茜晨. 仿生可避障大深度星际采样器及采样方法. ZL202011630723.1

(4) 薛龙建, 谢宇, 陈雯慧, 杨柏松, 杨茜晨. 冷冻3D打印装置及三维结构打印方法. ZL202010952477.5

(5) 薛龙建, 汪鑫, 杨柏松, 刘胜. 一种仿生软体机器人. ZL 201811230323.4