李梦佳
最后更新时间 : ..
李梦佳,副教授、硕士生导师,中国复合材料学会复合材料检测与评价技术专业委员会委员。毕业于南京航空航天大学航空学院飞行器设计专业,国家公派赴英国伦敦大学学院学术访问一年。主要研究方向为先进复合材料结构设计。近5年主持国家自然科学基金1项,浙江省自然科学基金1项,主要研究复合材料层间增强方法及作用机理,作为第一作者或通讯作者在SCI二区以上期刊发表学术论文10余篇。主持教育部产学合作协同育人项目2项。
2012-2019年间参与了多项中国航空研究院、上海飞机设计研究院、成都飞机设计研究所、中国直升机设计研究所、沈阳飞机设计研究院课题,研究新型复合材料的耐高温性能、新型复合材料变刚度层合板的设计与制造、复合材料整体化结构的Z-pin/缝合界面增强设计方法、全复合材料机翼的设计与失效分析等。
代表性科研项目 | ||||
国家自然科学基金 | CNF/Z-pin多尺度协同增强复合材料层合板的边缘冲击失效机理研究 | 2021.01-2023.12 | 主持 | |
浙江省自然科学基金 | CNF/Z-pin多尺度协同增强复合材料层合板的冲击失效机理研究 | 2020.01-2022.12 | 主持 |
代表性学术论文 | |
1. Mengjia Li, Chengjie Lai, Guozhi Zhao, Ying Gao, Yuan Zhao, E Shiju , Puhui Chen. Synergistically enhancing the compression after edge-on impact performance of composite laminates through multi-scale CNF/Z-pin toughening, Thin-Walled Structures, 2025, 204(113122). SCI一区top 2. Guozhi Zhao, Mengjia Li*, Ziang Zhang, Jiajia Zheng, Ye Zhang, Yuan Zhao, Zhonglue Hu, Puhui Chen*. Synergistically improving the edge-on impact damage resistance of composite laminates using multi-scale CNF/Z-pin toughening, Composites Science and Technology, 2024, 252 (110586). SCI一区top 3. Guozhi Zhao, Mengjia Li*, Yuan Zhao, Jiajia Zheng, Ying Gao, Xin Chen, Zhipeng Dai, Puhui Chen. Synergistic improvement of the compression-after-impact performance of composite laminates by multi-scale CNF/Z-pin reinforcement, Thin-Walled Structures, 2024, 204(112332). SCI一区top 4. Guozhi Zhao, Mengjia Li*, Ying Gao, Yuan Zhao, Puhui Chen. Comparative numerical study on the impact resistance of Z-pin reinforced and unreinforced composite laminates, Polymer Composites, 2024, 1-5. SCI二区 5. Guozhi Zhao, Mengjia Li*, Ying Gao, Yuan Zhao, Puhui Chen. Exploration of failure mechanisms in a novel basalt fiber-reinforced phthalonitrile composite under extreme temperature conditions, Composites Communications, 2024, 52(102148). SCI二区 6. Guozhi Zhao, Mengjia Li*, Shenglu Wang, Xilan Peng, Lulu Wang, Xiping Li, Yuan Zhao, Yin Gao, Ye Zhang, Jiajia Zheng. Effect of interlaminar basalt fiber veil reinforcement on mode I fracture toughness of basalt fiber composites, Polymer Composites, 2024, 45: 4985–4993. SCI二区 7. Guozhi Zhao1; Mengjia Li1; Xiping Li; Jiajia Zheng; Ziang Zhang; Zhonglue Hu; Yuan Zhao; Puhui Chen. Improving the impact damage resistance of composite laminates using CNF/Z-pin multi- scale toughening, Thin-Walled Structures, 2023, 189(110895). SCI一区top 8. Boran Chen, Weiping Dong, Jiajiang Zhao, Yuan Zhao, Linlin Wang, Xiping Li, Mengjia Li ∗, Puhui Chen.Reinforcing effect of lock stitching with small density on the tensile properties of composite T-joints, Thin-Walled Structures, 2022, 177: 109411. SCI一区top 9. Mengjia Li*; Puhui Chen*; Xiping Li; Jiajia Zheng; Weiping Dong; Capacities of Z-pinning in improving the bending performance of composite T-joints, Polymer Composites, 2020, 41: 2125-2133. SCI二区 10. Mengjia Li*; Puhui Chen*; FE parametric study on the longitudinal tensile strength and damage mechanism of Z-pinned laminates, Polymer Composites, 2020, 41: 585-599. SCI二区 11. Mengjia Li*; Puhui Chen*; Xiping Li; Ningning Gong; Experimental and numerical study on the tensile properties of T-joints with low Z-pin volume density, Polymer Composites, 2020, 41:258-270. SCI二区 12. Mengjia Li; Puhui Chen*; A new FE model for predicting the bridging micromechanisms of a Z-pin, Composite Structures, 2019, 223: 110957. SCI二区 |
通讯/办公地址 :
邮箱 :
2008.9 -- 2012.6
南京航空航天大学
 飞行器设计与工程
 大学本科毕业
 学士学位
2017.3 -- 2018.3
University College London
 材料学
 研究生教育
2012.9 -- 2015.4
南京航空航天大学
 飞行器设计
 硕士研究生毕业
 硕士学位
2015.4 -- 2019.4
南京航空航天大学
 飞行器设计
 博士研究生毕业
 博士学位
2019.5 -- 至今
浙江师范大学 工学院
2024.7 -- 至今
中国复合材料学会复合材料检测与评价技术专业委员会委员
复合材料界面增强方法
复合材料失效分析
复合材料结构设计